Oh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.I have most of the parts to a US signal generator from the 40´s. It’s for calibrating radar and have a 30 cm silver-plated radio signal emitting tube for generating the signal. inside its mica cap that should contain silver. In Principe its the emitter part of a radar system without antenna and its electronic. Laying in an other place together with the manual. will check up its code and name. If any is interested of this stuff contact me. Have the tubes and crystals as well. Perfect if you want to cook someone so not to play with.
Made by Davon company the model numbers in the first picture.Oh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.
Time for more coffee.
I will check it up and post model/numberOh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.
Time for more coffee.
model number TS-497B/URR serial number 1428 my mistake it is from the Amry not Navy I do have another machine from the US Navy just have to find it ill try to remember to post a picture when I doOh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.
Time for more coffee.
here's a picture of the rest of the machine from the US ArmyOh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.
Time for more coffee.
here's a picture of theWow! Machines with real crystal oscillators. That takes me back.
Haven’t opened one since maybe 1983. If I remember correctly, and sometimes I do not, many of the solder pads, on both the boards and switches, should be silver plated.
Some of the capacitors may have silver foils. Most, however, will be aluminum foil.
This signal generator was definitely not the best the military had to offer. It was, however, very durable. It was found in electronic repair shops in the Army, Navy, and Marines, to include Reserve units.
If working, or even repairable, it could be worth a few hundred $$ to the right collector of military electronics.
Have fun.
Time for more coffee.
here's the rest of the US Army machine it even has the old Allen wrenches that came with it.Oh, the toys we played with. Got the model # and manufacturer? Might have had to repair one of those, too. Those multilayered manual switches were downright annoying.
Time for more coffee.
Enter your email address to join: