Cyanide and sodium thiosulfate reaction

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kjavanb123

Well-known member
Joined
Apr 1, 2009
Messages
1,746
Location
USA
Hi everyone,

I have been dealing with dry river soil, and most places my aqua regia testing shows strong positive for gold. I follow that test with smelting a sample 10kg with lead oxide then cupel to get the silver gold bead.
Once the sample passed those tests, I collect 100kg sample, sieve it, and prepare a hot cyanide solution, add the soil, mix and in small increments add hydrogen peroxide, for 40 minutes. I then filter the solid, and this is what I am confused. I used zinc powder to drop the values from the cyanide solution, but for the rive soil samples. no zinc powder works.

I read by adding excessive amount of sodium thiosulfate to cyanide solution, it will drop the values as well as destroying cyanide, but in practice it doesn't work. Is this true that sodium thiosulfate destroys the cyanide but drops the gold?

Thanks
KJ
 
Hi everyone,

I have been dealing with dry river soil, and most places my aqua regia testing shows strong positive for gold. I follow that test with smelting a sample 10kg with lead oxide then cupel to get the silver gold bead.
Once the sample passed those tests, I collect 100kg sample, sieve it, and prepare a hot cyanide solution, add the soil, mix and in small increments add hydrogen peroxide, for 40 minutes. I then filter the solid, and this is what I am confused. I used zinc powder to drop the values from the cyanide solution, but for the rive soil samples. no zinc powder works.

I read by adding excessive amount of sodium thiosulfate to cyanide solution, it will drop the values as well as destroying cyanide, but in practice it doesn't work. Is this true that sodium thiosulfate destroys the cyanide but drops the gold?

Thanks
KJ
I believe you have to drop the pH to precipitate with zinc but that will also release cyanide. I would make sure you have excellent ventilation.
 
Hi everyone,

I have been dealing with dry river soil, and most places my aqua regia testing shows strong positive for gold. I follow that test with smelting a sample 10kg with lead oxide then cupel to get the silver gold bead.
Once the sample passed those tests, I collect 100kg sample, sieve it, and prepare a hot cyanide solution, add the soil, mix and in small increments add hydrogen peroxide, for 40 minutes. I then filter the solid, and this is what I am confused. I used zinc powder to drop the values from the cyanide solution, but for the rive soil samples. no zinc powder works.

I read by adding excessive amount of sodium thiosulfate to cyanide solution, it will drop the values as well as destroying cyanide, but in practice it doesn't work. Is this true that sodium thiosulfate destroys the cyanide but drops the gold?

Thanks
KJ
A slight excess of Cyanide is helpful.
And if there is little Gold you may not even see it dropping.
Test with a strip of Aluminum foil first maybe.
 
Hi

Thanks for your reply. I used the Hokes method to test for gold in cyanide solution, I siphoned 2.5ml of pregnant cyanide solution, under fume hood, added 2.5 ml of HCL, the color changed to yellow, then using a Q tip, I collected the solution, and added stannous chloride testing solution, after 30 minutes it turned to light blue color, which is different from the purple I am used for gold.
 
Hi

Thanks for your reply. I used the Hokes method to test for gold in cyanide solution, I siphoned 2.5ml of pregnant cyanide solution, under fume hood, added 2.5 ml of HCL, the color changed to yellow, then using a Q tip, I collected the solution, and added stannous chloride testing solution, after 30 minutes it turned to light blue color, which is different from the purple I am used for gold.
Did you test using an Aluminum strip/foil in the Cyanide solution?
 
Did you test using an Aluminum strip/foil in the Cyanide solution?
Hi

Yes I used zinc powder to cement the gold, but it only dropped black powder which didn't dissolve in HCL but dissolved in nitric and solution turned pale yellow, negative for silver or palladium.
 

Latest posts

Back
Top